CO Clear - Carbon Monoxide Sensor
CO Clear - Dimensions
CO Clear - Carbon Monoxide Sensor
CO Clear - Dimensions

CO Clear

MULTI-GAS MONITORING SAFETY SYSTEM

Designed to detect the presence of carbon monoxide in air or nitrox gas compressors.

Key Features:

  • Uses a cost-effective replacement electrochemical cell, helping to minimize running costs
  • Rugged design for a busy compressor room
  • Audio and visual alarms for use in noisy environments

Industries who use the CO Clear for detecting carbon monoxide contaminants in compressed breathing air

Compared to colorimetric tubes, the CO Clear is simple to install and maintain and is a cost-effective way to continually monitor for the presence of carbon monoxide (CO).

Diving icon

DIVING

Compressed Breathing Air

CO Monitoring with the CO Clear

Do you believe that a periodic check of your breathing air quality is enough or would continual monitoring with a CO Clar be a better solution?

Keeping your air safe

Compressed breathing air can be contaminated by carbon monoxide (CO) through issues relating to compressor maintenance or from the compressor inlet. If this goes undetected it could prove potentially fatal to anyone who breathes in the contaminated air.

Keep your air clean with the CO Clear.

Audio & Visual

With audio/visual alarms and options including relays and 4-20mA, there is no better value, or more accurate and reliable CO monitor on the market. It is available as either a 230 V AC, 110 V AC or 24 V DC powered unit, and fitted with UK, Euro, US or Australian plugs.

The instrument uses an electrochemical cell together with state of the art technology, built in an IP65 splash proof housing, and is designed to provide long, trouble free service, with minimum maintenance.

Designed for purpose

Carbon monoxide is a dangerous and potentially lethal gas, the effects of which are increased with pressure. It could enter the breathing gas from the compressor inlet or from issues relating to the compressor maintenance.

Analox recommends that a twin stage regulator is used to reduce the sample pressure.

The Analox CO Clear is designed to detect the presence of carbon monoxide in air or nitrox gas compressors. The monitor is wall mounted to provide continuous online monitoring.

Optional Extras & Accessories

The Analox CO Clear is designed to detect the presence of carbon monoxide (CO) in air or nitrox gas compressors. We offer the following spares & accessories:

Skip to content